Motorised transport trolley with lift mechanism (CTME)

CTME Consists of a platform with a loading capacity of 1,000kg to 10,000kg that moves freely over the ground.

One typical use of the CTME is to move a load placed on a bench. In this case, the trolley enters below the bench, lifts it all, moves it and sets the bench and load back on the ground.

Simplified models of the above are the CTM motorised transport trolley, capable of carrying the load, but without lifting mechanism, and the CTE manual transport trolley. In both cases, the movement may be directly on the ground or on guiding rails.

CTME Rp ITP 016 Rp ITP 016 CTME

Our carts are provided with safety mechanisms , such as anti-entrapment protections, emergency stop, bumpers, etc.

Free-translation models can have a joystick (cable or radio) for more flexibility in the control of movements, as well as automated direction change (longitudinal or transverse shift)

The motorized models may receive their electrical supply through batteries, which afford them total freedom of work and movement. They may also be supplied from power grid.

Possible movements
The carriage is moved by two motorized wheels, and two or more freely rotating wheels.

The two motors can be activated in any of the two directions independently-differential-system via a keypad (or a remote radio options).

The vehicle moves in a straight line if the two motors are activated in the same direction, or tour, if only one engine is activated, or activated both in different ways.

CTM-1
Standardized Measures
The platforms are manufactured in standard sizes. Other measures are possible on request.

Capacity (Kg) L (m) A (m) Model CTM
1.000 1
2
3
4
1
1
1,5
2
101010
102010
103015
104020
2.000 1
2
3
4
1
1
1,5
2
201010
202010
203015
204020
3.000 2
3
4
1
1,5
2
302010
303015
304020
4.000 2
4
1,5
2
403015
404020
5.000 3
4
1,5
2
503015
504020
6.000 3
4
1,5
2
603015
604020
8.000 4 2 802020
10.000 4 2 1004020
CTME-2
Options
  • Radio command with four emergency stop buttons and control all movements of the CTM.
  • Guidance system using a ground rail for areas where a certain route must be followed for safety reasons.

Motorised trolley with crane (CTMG)

CTMG The motorised trolley with crane (CTMG) consists of a counterbalanced platform that moves freely over the ground and comes equipped with a ‘Donati’ crane and hoist at one end.

It can lift a load and move with the load suspended thanks to its two motorised wheels and freely rotating wheel.

The load capacity varies from 125kg to 2,000kg, according to the model. The vehicle may move in a straight line or turn (differential system).

These models may receive their electrical supply though batteries, which afford them total freedom of work and movement. They may also be supplied with power through the grid.

Possible movements
The arm is limited to rotating only a few degrees around the central axis, but any point may be reached by moving the trolley.

CTM-1
Standardized Measures
The platforms are manufactured to standard measurements. Other measurements are possible upon the customer’s request.

Capacity (Kg) Arm Length (m) Dimensions A x L (m)
125 2
3
4
5
6
7
8
1,2 x 1,5
1,2 x 1,5
1,2 x 1,5
1,2 x 1,5
1,2 x 1,5
1,2 x 1,5
1,2 x 1,5
250 2
3
4
5
6
7
8
1,2 x 1,5
1,2 x 1,5
1,2 x 1,5
1,2 x 2
1,2 x 2
1,2 x 2
1,2 x 2
500 2
3
4
5
6
1,2 x 1,5
1,2 x 2
1,6 x 2
1,6 x 2,5
1,6 x 2,5
1.000 2
3
4
1,6 x 2
1,6 x 2,5
2,2 x 3
2.000 2 2,2 x 3
CTME-2

Smaller-capacity models also come in a manual transport (CTEG) version.

Available models
Arm Length (m) / Capacity (kg) 2 3 4 5 6 7 8
125
250
500
1.000
2.000
Manual or motorized translation Translation only motorized
Options
  • Radio command with six buttons and an emergency brake to control all the CTMG’s movements.
  • Guidance system using a ground rail for areas where a certain route must be followed for safety reasons.